![](http://designapplause.com/wp-content/xG58hlz9/2008/09/pumaatmosset1.png)
![](http://designapplause.com/wp-content/xG58hlz9/2008/09/pumamac1.png)
We are alerted: World Animal Day is October 4. This post celebrates environment, design, fashion, and animals used in marketing efforts.
Here we feature a collaboration between Puma and Atmos NY, which consists of three pairs of Puma models inspired by three endangered
polar animals: the Harp Seal, Macaroni Penguin and Polar Bear. Each sneaker has its own unique design, but comes with the works of National Geographic photographer Mitsuaki Iwago featured on it, as well as a transparent outsole.
![](http://designapplause.com/wp-content/xG58hlz9/2008/09/pumaseal1.png)
Each shoe in the collection captures the unique characteristics of a specific animal, and features Mr. Iwago’s photography on the removable insole. The name and habitat of each animal is on the reverse tongue and the outsole in both English and Japanese. The shoes were created in hopes of bringing attention to our impact on these endangered animals.
The third shoe shown in the Polar Pack is the PUMA x Atmos Polar Bear Clyde. Drawing direct inspiration from the polar bears of the Artic the shoe features an off white nubuck upper and fur collar, while the blue ice sole represents the Polar Bear’s natural habitat. The shoe comes with three sets of colored laces and have the Atmos “A” on the lace tips and heel. The Polar Bear is currently ranked as vulnerable and is considered to be facing a high risk of extinction in the wild.
![](http://designapplause.com/wp-content/xG58hlz9/2008/09/pumapolar1.png)
![](http://designapplause.com/wp-content/xG58hlz9/2008/09/pumaseal3.png)
![](http://designapplause.com/wp-content/xG58hlz9/2008/09/pumaseal4.png)
![](http://designapplause.com/wp-content/xG58hlz9/2008/09/pumaseal5.png)
Found exclusively at Atmos as June 2008. via Pet Monologues —World Animal Day and Bless the Animals.
![](http://designapplause.com/wp-content/xG58hlz9/2008/09/starck1.png)
Phillipe Starck’s latest — a plastic chair — earned it’s name on the first sketch. Mr. Impossible. The designer said it couldn’t be made. The challenge being the weld. Using existing methods to weld the seat and the legs would create an unsightly seam. Kartell’s engineers had to go the blue water route. The key, a very big laser.
The Kartell store in New York recently exhibited Mr. Impossible, a series of chairs by Philippe Starck. While the design for Mr. Impossible was conceived years ago, the technology needed to weld two transparent shells together did not exist until recently. Also on display was Starck’s Misses Flower Power, a collection of large-scale prototype vases made from transparent polycarbonate. (more…)
![](http://designapplause.com/wp-content/xG58hlz9/2008/06/do1.jpg)
![](http://designapplause.com/wp-content/xG58hlz9/2008/06/thrush.jpg)
It’s summer in our hemisphere. Long days. Warm weather. Spending more time outdoors. Here is a innovative product that you make yourself at the beach or on a picnic — the cutlery! What fun!
The cutlery (Do!) and an extension cord (Thrush-In) that stores nicely in its own felt container is designed by Arihiro Miyake. The utensils are fashioned by hand and you also make that fashion statement. The designer labels the cutlery disposable but we propose the environmental statement. Throw them in the dishwasher!.
These are just some of the items found in New York mid-May. The main draw was the International Contemporary Furniture Fair at the Javits Center, but there were many off-site events to go to. One was the Hardcore Finnish Design exhibit featuring 20-plus Finnish designers. (more…)
A home that makes the Smart car, standing side-by-side, look like a SUV. No, an 18-wheeler.
“Micro-Compact Home” [m-ch] was inspired by Japanese tea houses, yes, the Smart car and first class air travel. They are lightweight, modular, mobile and very minimal 2.65m (roughly 77 sq ft). That equates into a 266 x 266 x 266 centimeter cube ‘Home,’ Imagine that? It’s not for the claustrophobic, a dwelling non-the-less, for one or two people. This is not a tent, a trailer, but a home, in a super compact design.
![](http://designapplause.com/wp-content/xG58hlz9/2008/05/pod_bed_m1.jpg)
The tiny cube provides a double bed on an upper level and working table and dining space for four to five people on the lower level. The entrance area has triple use: it functions as a bathroom and drying space for clothing, in addition to a lobby. Costing $80,000 USD, this little prefab integrates state-of-the-art technology into its compact design, boasting a sound system, flat screen TV, and temperature controls. It requires no furniture and all storage space is cleverly concealed within the structure of the dwelling. (more…)
![dyson-dp24-1.jpg](http://designapplause.com/wp-content/xG58hlz9/2008/04/dyson-dp24-1.jpg)
![](http://designapplause.com/wp-content/xG58hlz9/2008/10/home-hero1.png)
Worried about space? The Dyson DP24 is for you. This version of the top-shelf Ball, measures only 29.6 inches tall and weighs 11.6 pounds. And its sucks the color off the carpet. Visit Dyson DP24
Home Depot was surprised by the fire-safety statistics. Their new design lab creates Home Hero. The goal was to create a kitchen fire extinquisher that people would proudly keep on their countertops. CLICK AND DRAG THE OBJECT TO VIEW FROM DIFFERENT ANGLES. IDEA 2007 Gold Award winner in consumer products. Visit Home Hero
![sorapot21.jpg](http://designapplause.com/wp-content/xG58hlz9/2008/03/sorapot21.jpg)
When does form and function equal art? Here is an example. A recent reviewer said “If Apple did housewares, this might be the iPot.
Inspiration: Brooklyn, designer Joey Roth— “I’ve always been entranced by small, beautiful things that are so detailed, they seem like miniature worlds, yet so ordinary they’re often left unnoticed. I designed Sorapot to emphasize one of my favorite- the unfurling of tea leaves. Sorapot suspends the process of tea making in a glass tube a few centimeters above your tabletop. Unlike standard teapots that confine tealeaves in a small mesh basket, your leaves will have full run of Sorapot’s interior as they unfurl and change the hot water into tea. You might even see a tea-colored shadow cast by sunlight that passes through the tube and comes to rest in a gossamer puddle on your table.”
![](http://designapplause.com/wp-content/xG58hlz9/2008/10/sora5.png)
The Sorapot package benefits aesthetically from naturally imperfect corrugate patterns and earthen hues. Natural materials such as jute and recycled paper ensure its biodegradable impermanence. The molded pulp composition of the package provides a sturdy yet forgiving structure that is stout enough to function as a nested shipper and attractive enough to present well at retail.
Glass teacup
Joey is not done. There is also a twist to the new teacup. Joey says, “As you can see in the Sorapot video, glass tumblers are my favorite teacups. The contrast between the smooth glass and the fragrant amber tea may not make the brew taste better, but it definitely heightens the experience for me. I designed this teacup to emphasize the the beauty of tea on glass while insulating your hand and tabletop from heat.”
![sorateacup1.jpg](http://designapplause.com/wp-content/xG58hlz9/2008/03/sorateacup1.jpg)
![sorateacup2.jpg](http://designapplause.com/wp-content/xG58hlz9/2008/03/sorateacup2.jpg)
![sorateacup3.jpg](http://designapplause.com/wp-content/xG58hlz9/2008/03/sorateacup3.jpg)
Another distinguishing feature is the Sorapot’s glass and metal components are fully recyclable.
The Sorapot and glass teacup can be purchased online at joeyroth.com We are going to get one. A spot of tea anyone?
![bottle2.jpg](http://designapplause.com/wp-content/xG58hlz9/2008/03/bottle2.jpg)
![bottle3.jpg](http://designapplause.com/wp-content/xG58hlz9/2008/03/bottle3.jpg)
Just about the time we should be thinking about 86ing our plastic bottled water habits we have a bottle story. We came across this art and artist via trespluscool The artist is Martine Camillieri, a french artist who works with colorful plastics. Trying to think of an adequate bumper sticker here. —No to trash. Make art!— You get the idea, help us out here.
see our post 21st century waterfall
![eames-elephant1.jpg](http://designapplause.com/wp-content/xG58hlz9/2008/03/eames-elephant1.jpg)
If you like Eames, a collectors item, a childs toy resurfaces.
During the early 1940s Charles and Ray Eames developed a successful technique for molding plywood into three-dimensional shapes, which led to the creation of a variety of furnishings and sculptures. The Plywood Elephant, in particular, has attained legendary status among collectors. Designed in 1945, this piece requires complex fabrication methods. Only two prototypes were produced, both of which were subsequently displayed in an exhibition at the New York Museum of Modern Art. Today only one known model remains in the possession of the Eames Family.
Charles and Ray Eames were fascinated by elephants. Many images of these gentle giants are found in Charles’ photographic documentations of Indian culture and the circus world. The Plywood Elephant was designed as a toy for children, but also as a striking sculptural object that makes a statement in any environment with its vigorous curves and delightful character. There is a playful charm in the way that the Eameses used juvenile motifs to create a vibrant, cheerful idiom that appeals to adults as well as children.
June 17, 2007 marked the 100th birthday of Charles Eames. To commemorate this occasion, Vitra is producing a limited Anniversary Edition of the Eames Plywood Elephant. Designed in 1945, this piece attained legendary status in spite of the fact that it never went into production.
The 2007 Anniversary Edition of the Eames Plywood Elephant is strictly limited world-wide to 1000 pieces in each of two versions, natural maple and red stained maple. The serial number of each Plywood Elephant is engraved on a small aluminum plaque. DA is sorry this post is so late in coming. Check with Vitra to see if any are still available.
![stairs1.jpg](http://designapplause.com/wp-content/xG58hlz9/2008/03/stairs1.jpg)
![stairs2.jpg](http://designapplause.com/wp-content/xG58hlz9/2008/03/stairs2.jpg)
the problem and the solution
These stairs are beautiful. An artform. No 5 inch stilettos or alcohol allowed. This is a very clever solution. You have to wonder who conceived of the problem in the first place…
Title: Stair
Object: Stair
Location: Stockholm, Sweden
Client: Private Residence
Design: Gabriella Gustafson & Mattias Ståhlbom
Date: 2006
via TAF
![bike-funny1.jpg](http://designapplause.com/wp-content/xG58hlz9/2008/03/bike-funny1.jpg)
![bike-wood1.jpg](http://designapplause.com/wp-content/xG58hlz9/2008/03/bike-wood1.jpg)
What do these two bikes have in common? Two wheels? We can feel the love.
Designer Roland Kaufmann has gone and built a bicycle out of wood. He calls this cycle Jano, and says it’s a dual bike, equally at home trekking cross-country or taking its rider to and from work every day. This project has gone beyond some vaporware CAD drawing—he’s actually built a great-looking prototype, riding this bike around and impressing everyone in sight. Although Kaufmann never reveals the exact weight of his wooden bike, he extols the virtues of using wood which is pretty innovative. Why wood?
“Did you know that wood is up to 10 times stiffer than fiberglass and nearly 6 times stiffer than a kevlar/epoxy composite? Using wood and epoxy industry created some of the world’s best multi-hulled sailboats, sprint kayaks and rowing shells. lightweights. Quicker in acceleration. Easier in maneuvering. More convenient to carry. Straightforward to maintain and visually divine. A swan among ducks. So why not also using this material for a bike?”
He uses wood veneers glued together into a unique configuration, which he says gives the resulting frame more stability while still reducing its thickness. Cyclists, will this work? Sure looks great, an example of superb craftsmanship.
via GP Designpartners, Treehugger, and gizmodo
about ron kovach